perfect for decorating your favorite backpack, jacket or hat!
Original Design by Ardent Ink
Iron on embroidered patch
How To Apply Heatseal Backing 1) Wash fabric first. Fabric softener should not be used. 2) Set iron to cotton setting. Do not use steam, and remove water from iron. 3) Lay your garment out on a hard, heat tolerant surface. A padded ironing board is not hard enough. Try placing a cutting board above padding. 4) Place heatseal side of patch onto fabric in desired placement area. We recommend using teflon sheet or spare cloth over patch to help keep garment from possibly burning/melting. *do not iron onto nylon* Iron design for approximately 30-60 seconds, applying pressure. Do not move iron side to side as this may cause design to shift. Heavier fabrics may require more time, and lighter fabrics may require less time. 5) Allow time to cool, then make sure entire surface area is applied to fabric. If all pieces did not adhere, reapply heat for an additional 20-30 seconds. Allow to cool. 6) Turn garment inside out and apply iron to back of design area for approximately 30 seconds. Wait 48 hours before washing, and turn garment inside out when doing so